Need help?Do you have a question about the Hanna Instruments HI 2550 and is the answer not in the manual?
General| Brand | Hanna Instruments |
|---|---|
| Model | HI 2550 |
| Category | Measuring Instruments |
| Language | English |
Covers preliminary examination, general description, and functional layout of the instrument's front and rear panels.
Instructions for power, electrode setup, startup, and performing pH, mV/ORP, and conductivity measurements.
Procedures for TDS, NaCl, and temperature measurements.
Detailed procedures for pH calibration, including preparation, methods, and custom buffers.
Procedures for Relative mV, EC/TDS, and NaCl calibration.
Viewing stored calibration data and managing calibration expiration alarms.
Methods for retrieving stored calibration data for Relative mV, EC, and NaCl.
Instructions for logging data and viewing stored measurement records.
Configuring common, pH, and EC/TDS/NaCl specific instrument parameters.
Adjusting calibration alarms, intervals, custom buffers, pH resolution, and compensation settings.
Procedures for recalibrating temperature and mV measurement ranges.
Connecting the instrument to a PC and sending commands for control and data retrieval.
Procedures for preparing, storing, and maintaining electrodes for optimal performance.
Specific methods for cleaning pH and EC electrodes.
Lists of buffer, storage, cleaning solutions, electrolytes, and various electrodes.
Information on extension cables, simulators, and other related accessories.
To Next Page