Need help?Do you have a question about the Hanna Instruments HI 2002 and is the answer not in the manual?
General| Brand | Hanna Instruments |
|---|---|
| Model | HI 2002 |
| Category | Measuring Instruments |
| Language | English |
Important precautions for safe operation and handling of the instrument.
Guide to initial setup and configuration of the instrument.
Steps to connect the pH electrode and expected status messages.
Explains the instrument's data logging capabilities.
Details on continuous data logging at set intervals.
Instructions for manually logging data on demand.
Describes logging data based on measurement stability.
Accessing and reviewing stored measurement records.
Steps for transferring logged data to a USB flash drive.
Instructions for transferring data to a computer via USB.
Comparison and explanation of the two pH measurement modes.
Full calibration capabilities in standard pH mode.
Step-by-step guide for performing pH calibration.
Details on performing calibration in basic mode.
Steps for starting and stabilizing a pH measurement.
Explains error messages displayed during measurement.
Steps for calibrating the relative mV mode.
Steps for taking relative mV measurements.
Explains error messages during relative mV measurement.
Procedures for maintaining the pH electrode.
Guidelines for taking measurements with the probe.
Guidelines for taking ORP measurements and storing the sensor.
Troubleshooting steps for sensor connection and response problems.
Diagnosing and resolving calibration failures and inaccurate readings.
To Next Page