Setup/Installation 15
Stability Logging
Select Stability and choose measurement stability
criteria in the SETUP menu. Only Stability Medium
is available in Basic mode. To initiate the Stability
log, press the LOG key while the instrument is in
measurement.
The “PLEASE WAIT” screen will be displayed brie y
followed by a screen showing the stability tag, “LOG”
tag and a “WAITING” message. The log can be stopped
while the “WAITING” message is displayed by pressing
LOG again.
When the stability selected criteria has been met,
a “SAVED” message will be displayed followed by a
screen indicating how much log space is available. The
“LOG” tag will be displayed on all 4 screens.
“PLEASE WAIT”
“WAITING”
“SAVED” with the log record number
“FREE” with the number of free spaces available
All log records stored on edge
pH
® may be viewed on the meter by pressing the
RCL key. The log records are grouped according to measurement (pH, ORP).
The parameter displayed rst is based on the probe/
sensor connected. The display also indicates the
percentage of log memory used. Press CFM to display
those logs.
Choices are:
• Manual log on demand lot,
• Manual log on stability lot,
• Individual Interval logging lots.
If no data was logged for the selected measurement
range, the instrument displays the following messages
(ex. for pH range):
“NO MANUAL LOGS”
“NO STABILITY LOGS”
Logging
Function
Viewing
Logged
Data
To Next Page
Loading...
Need help?
General
