Hanna Instruments HI 2002 User Manual

Setup/Installation
12
Option Description Choices Default Basic mode
Set Auto O
Used to save
battery life by
automatically
turning o when
no key press is
detected for
time set and
meter is not in
active logging or
calibration mode.
5, 10, 30, 60
Min
or O
10 MIN Available
Sound
If enabled, a
short audible
tone is produced
for key stroke
or calibration
con rmation and
a longer tone for
wrong key.
On or O On Available
Temperature
Unit
Select degree
Celsius or
Fahrenheit scale
for displayed
and logged
temperatures.
ºC or ºF ºC Available
LCD Contrast
Permits
modi cation
of the display
contrast for
various lighting
conditions.
1 to 8 3 Available
Flash Format*
Only seen when
log errors are
present.
Permits
formatting the
 ash drive.
On or O OFF Available
Message
Transition
User may choose
how messages
are displayed on
third LCD line of
display.
Word scroll
messages or
letter scroll
messages
Letter scroll
messages
Available
Reset Con g To
Default
Press the MODIFY key and CFM (when prompted) to
reset parameters.
Available:
RESETS with
Basic Mode OFF.
Instrument
Firmware/ Probe
Firmware
Displays  rmware
version of meter.
Using the u
key switches to
Probe  rmware
(if connected)
and diagnostic
made for
troubleshooting.
View only
Current
 rmware
version.
Available
Meter ID/
Meter SN/
Probe SN
User ID and
Serial Number of
meter and probe
(if connected).
Use
u to
change between
the three
parameters.
Meter ID is user
selectable
0000/ Serial
Number
Available
*Note: Options that are seen under special conditions only.
General
Setup

Hanna Instruments HI 2002 Specifications

General

Brand	Hanna Instruments
Model	HI 2002
Category	Measuring Instruments
Language	English