14
Log History
The measurement, along with Log History, will be visible when this option is selected:
1) The last stored logged data (Not actively logging) or
2) The last data logged from an active logging lot or
3) An empty display - NO LOTS saved, NOT currently logging
The log history list also contains the appropriate mV values, the logged temperature, the temperature
probe status source, as well as the records time stamp.
To access the Log History display option:
• Press
while in Measure mode. The “Choose Display Configuration” message will be
displayed in the Reminder messages area.
• Press
. The instrument will display the log history regarding the selected Measure
mode.
Notes: When an alarm condition is active, all logged records will have an exclamation mark “!”
If logged in Auto Hold, logged records will have an “H”.
If another Measure mode is selected, the Log History will reset.
If the temperature unit is changed, all logged temperature values will be
automatically displayed in the new temperature unit.
DISPLAYING MODES
To Next Page
Loading...
Need help?
General
