User’s Manual
16
PICTURE QUALITY SETTING
SHARPNESS
Select the「Sharpness」option to adjust the sharpness of the
display.
RESPONSE TIME
Setup the display response time through the response time
function. Available settings are Off/ High/ Middle/ Low.
SUPER RESOLUTION
Select the super resolution according to your preference: Off/
High/ Middle/ Low.
BLACK LEVEL
Select the「Black Level」option to adjust the black level of the
display.
DISPLAY
ASPECT RATIO
Setup the aspect ratio of screen through the aspect ratio function.
Available settings are Wide Screen/ 4:3/ 1:1/ Auto.
AUDIO
MUTE
Select the「Mute」option to switch the function On or Off. [The
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
VOLUME
Select the「Vo l u m e 」option to change the volume level. Enter the
option and adjust the level. [This function applies only to models
with incorporated audio.]
● By high volume, risk of hearing damage exists.
AUDIO SOURCE
While transferring via the PIP/ PBP, it can select the audio
source between DP or HDMI. [For DP/HDMI Input only]
MULTI-WINDOW
MULTI-WINDOW
Select the「MULTI-WINDOW」option to switch the PIP/ PBP
function.
SUB WIN2 INPUT
Select「SUB WIN2 INPUT」option to change the input source of
the PIP/ PBP. Enter the option and select DP or HDMI (2.0).
PIP SIZE
Select「PIP SIZE」option to change the window size. Available
settings are Small/ Medium/ Large.
PIP POSITION
Select「PIP POSITION」option to change the window position.
Available settings are Top Left/ Bottom Left/ Top Right/ Bottom
Right.
SWAP
Select「SWAP」option to change the 1
st
and 2
nd
window.
OSD
To Next Page
Loading...
Need help?
General