User’s Manual
12
HOW TO ADJUST A SETTINGS
LUMINANCE
BRIGHTNESS
Adjust the brightness value of the display according to your
preference. Select BRIGHTNESS option to adjust the
brightness value.
CONTRAST
Adjust the contrast value of the display according to your
preference. Select CONTRAST option to adjust the contrast
value.
ACTIVE CONTRAST
Optimal setting for high contrast images or videos. The dark
and light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the ACTIVE CONTRAST option.
ECO MODE
Select the preset mode according to your preference: Standard,
Game, Movie, Photo, Vivid, ECO
[The availability of this function depends upon the selected
model]
IMAGE SETUP
H-POSITION
Select H-POSITION option to adjust the horizontal position
of the OSD. Enter the option and adjust the level.
V-POSITION
Select V-POSITION option to adjust the vertical position of
the OSD. Enter the option and adjust the level.
CLOCK
Select the CLOCK option to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
PHASE
Select the PHASE option to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
ASPECT RATIO
When the aspect ratio of screen is distorted, you may make
adjustments by using this function. FULL indicates full
screen display, which does not ensure the image is shown as is
or in initial scale. FIT indicates scaling by the proportion of
original images, which may cause the screen showing black
bands. [The availability of this function depends upon the
selected model]
To Next Page
Loading...
Need help?
General