HANNspree HT221PPB - Operating Instructions; General Instructions

User’s Manual
10
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to
your personal preferences.
 The power cord should be connected.
 Connect the Signal cable from the monitor to the HDMI card.
 Press the power button to turn on the monitor. The power indicator will light up.
Menu / Enter
▼ [－]
Volume adjustment button
▲[＋]
Brightness adjustment button
Input source change / Return
Power Button
Figure.3. Control Panel Buttons