HANNspree HT221PPB - Page 14

User’s Manual
14
the OSD Language depends on the selected model]
OSD H-POSITION
Select 「OSD H-POSITION」option to adjust the horizontal
position of the OSD. Enter the option and adjust the level.
OSD V-POSITION
Select 「OSD V-POSITION」option to adjust the vertical position
of the OSD. Enter the option and adjust the level.
OSD TIMER
Select 「OSD TIMER」option to set the OSD time out from 5 to
60 seconds. Enter the option and adjust the level.
TRANSPARENCY
Select 「TRANSPARENCY」option to adjust the transparency of
the OSD. Enter the option and adjust the level.
SYSTEM
SCENE
Select the preset mode according to your preference: PC/
MOVIE/ GAME/ ECO.
VOLUME
Select the 「VOLUME」option to change the volume level. Enter
the option and adjust the level. [This function applies only to
models with incorporated audio.]
● By high volume, risk of hearing damage exists.
MUTE
Select the「MUTE」option to switch the function On or Off. [The
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
AUDIO INPUT
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor’s LINE IN (or
AUDIO IN) port. [For HDMI Input only]
SIGNAL SOURCE
Select the 「INPUT SETTING」option to change between analog
(VGA) or Digital (DP / HDMI) source. Enter the option and
select Analog or Digital.
RESET
RESET
Select the 「FACTORY RESET」option to reset to the monitor’s
default setting.