User
User
User
User
’
’
’
’
s
s
s
s Manual
Manual
Manual
Manual
8
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER SOURCE:
SOURCE:
SOURCE:
SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an 12V DC Adapter power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
SETTING
SETTING
SETTING
SETTING THE
THE
THE
THE MONITOR
MONITOR
MONITOR
MONITOR ON
ON
ON
ON THE
THE
THE
THE WALL
WALL
WALL
WALL
1. Purchase a VESA compatible wall bracket:
VESA 100 × 100, 4 holes, M4, 8 mm, 8kg.
2. Locate your ideal Monitor position on the wall.
3. Fix the wall bracket firmly on the wall.
4. Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor.
Note:
Note:
Note:
Note:
• Please read the instructions of your specific wall bracket to properly wall mount the Monitor.
• The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
• The screws type required is metric: M4, 8 mm length.
• The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of
the stand base.
• For use only with UL listed wall mount bracket .
*Installing the LCD Monitor requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask a
qualified service personnel about using an optional bracket to mount the Monitor to the wall.
To Next Page
Loading...
Need help?
General