Installation clearance requirements
When installing the beverage center under a counter, follow the recommended spacing dimensions.
To ensure proper service access and ventilation, the product must have at least 2 inches clearance in the back, 3/8”
at top and 3/8” at sides. The installation should allow the unit to be pulled forward for servicing if necessary.
Do not install the wine cooler/beverage cooler near an oven, radiator, or other heat source.
It is not recommended to install the appliance in a corner or flush against a wall. The door needs to open more than
90° to allow full extension of the shelves. Leave at least 2-4 inches (5-10 cm) of space between the wall and the
appliance to allow for the door opening when it is necessary to place the unit next to a wall or in a corner.
Built in cabinetry dimensions must be at least 24.6 inches (62.5cm) wide by 35 inches (88.9 cm) high by 25 inches
(63.5 cm) deep.
To Next Page
Loading...