Shelf Installation or Removal
To prevent damage to the doors or gasket seals, open the doors completely (past 90°) when removing the shelves.
When removing any of these shelves out of the unit, you must lift (from the rear) and pull it towards you. To
re-install, ensure the shelf is resting securely on the support brackets and push shelf inward until it locks into place.
CAUTION: Do not cover the gap of glass shelves with aluminum foil or any other material that will prevent
adequate air circulation within the cabinet.
Using Lock (Select Models Only)
• To lock the unit; ensure key is inserted into the keyhole. Turn the key in the arrow direction (counterclockwise)
shown in Figure A then the wine cabinet is locked.
• To unlock the unit: ensure key is inserted into the keyhole. Turn the key in the arrow direction (clockwise)
shown in Figure B then the wine cabinet is unlocked.
To Next Page
Loading...