Hanover DG3 - T0 - Timer 0; T1 - Timer 1; T2 - Timer 2; T3 - Timer 3

DG3 Controller – Installation and Operation Manual
540846-3 page 64 of 64 25/09/2015
T0 – Timer 0
10 - 3000
30
Sets the display time in deciseconds of the first destination page.
T1 – Timer 1
10 - 3000
30
Sets the display time in deciseconds of the second and subsequent destination
pages.
T2 – Timer 2
10 - 3000
30
Sets the display time in deciseconds of all the information pages.
T3 – Timer 3
0 - 3000
30
This will set the time that a Super-X scrolling page is allowed to scroll.
TV – Time Entry
0 = feature disabled
1 = sets time in hours and mins
2 = countdown timer in mins
3 = inserts current time in place of ‘~’
0
1 = used to set a fixed time, which will be substituted for any ‘~’ character within
the Helen destination or driver display database.
2 = counts down from a specified number of minutes when destination code
containing '~' is selected.
3 = inserts current time when destination code containing ‘~’ is selected.
Please refer to 3.5.3.1 Configuration code option: Time entry (TV) for more
information.
WD – Wayfarer
Device No
0 - 15
(default depends on Wayfarer interface)
0
Function depends on Wayfarer settings
WA – Wayfarer
Address No
0 - 15
(default depends on Wayfarer interface)
0
Function depends on Wayfarer settings