Hanover Fontana FNTDN7PCSW6RDTN User Manual

Store furniture in an upright position. Be careful to never allow water to build up in frames as this will
cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and
water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a
liquid wax for maximum protection against UV rays and/or salty, damp air. If your set includes
cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water
with a clean water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in
shrinkage or damage). After cleaning cushions tip on end and allow to drip dry. (Never use a
commercial or home dryer to tumble dry fabric goods). Do not use bleach or solvents to clean any
of the product! This will void the warranty.
To expedite any future warranty claims, please retain the Instruction Sheet, Warranty
Card, and Receipt for future use.
Care and Maintenance
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE TO THE RETAILER/STOREDO NOT RETURN
from where you purchased the product.
Please call our Toll-Free Customer Service Hotline at:
Between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday.
1-877-397-5144
Outdoor Furniture
STOP
Page 1

Hanover Fontana FNTDN7PCSW6RDTN Specifications

General

Brand	Hanover
Model	Fontana FNTDN7PCSW6RDTN
Category	Outdoor Furnishing
Language	English

Summary

Important Product Information

Customer Service Hotline

Toll-free number and hours for product support, missing parts, or assembly issues.

10-Year Limited Warranty

Care and Maintenance Guide

Regular Maintenance & Protection

General cleaning, frame protection, and stain prevention for outdoor furniture.

Specific Material Cleaning

Detailed care for teak, woven, fabric, mesh, straps, vinyl, stone, and marble components.

Table Assembly Instructions

Attaching Table Top Bracket

Steps to attach the top connector bracket to the table top with hardware.

Attaching Table Legs

Connecting table legs to the top and leg connector brackets using bolts.

Final Table Assembly

Tightening all fasteners, applying covers, and turning the assembled table upright.

Table Parts Identification List

Chair Assembly Instructions

Chair Assembly Recommendations

Advice for two-person assembly, frame alignment, and rocker positioning.

Critical "U" Plate Installation

Detailed steps for correctly installing "U" metal plates for the rocking function.

Final Chair Tightening

Securing all chair bolts and nuts and applying protective bolt covers.

Chair Parts Identification List