Hanover Traditions TRADDN7PCSW2G

Need help?

Do you have a question about the Hanover Traditions TRADDN7PCSW2G and is the answer not in the manual?

Summary

Important Contact and Return Information

Do Not Return to Retailer

Instructions to contact customer service instead of returning to the store for product issues.

Customer Service Hotline

Provides the toll-free number and operating hours for customer support.

Website Support

Directs users to the official website for additional online support and information.

1-Year Limited Warranty Program

Warranty Coverage and Exclusions

Details what manufacturing defects are covered and lists specific exclusions like normal wear, abuse, and improper use.

Warranty Claim Procedure

Outlines the steps to make a warranty claim, including required information like sales receipt.

Care and Maintenance Guide

General and Regular Maintenance

Provides basic cleaning advice for furniture and specific tips for metal frames and general protection.

Material-Specific Cleaning Instructions

Covers detailed cleaning methods for teak, woven resin, fabric, mesh, straps, and vinyl straps.

Stone and Marble Top Care

Guidance on maintaining stone and marble tabletops, including sealing, stain removal, and climate considerations.

Chair Assembly Instructions

Step 1: Positioning and Alignment

Details on how to position the chair frame and rocker assembly correctly for balanced rocking.

Step 2: Installing U Metal Plates

Critical instructions for correctly placing and securing 'U' metal plates with bolts, washers, and nuts.

Step 3: Final Tightening and Covers

Guidance on fully tightening all bolts and applying bolt covers for a secure and finished assembly.

Table Assembly Instructions

Step 1: Attaching Legs to Table Rim

Instructions for attaching table legs to the table rim using bolts and washers, hand-tightened initially.

Step 2: Connecting Legs to Brackets

Guidance on attaching legs to leg connector brackets with bolts, washers, and nuts, hand-tightened initially.

Step 3: Final Bolt Tightening

Procedure for tightening all bolts evenly using hex drivers and wrenches, and covering them with bolt covers.

Step 4: Installing Glass Top

Instructions for turning the table upright and carefully placing the glass top onto the clear bumpers.

This device manual describes Hanover Outdoor Furniture, specifically focusing on a swivel rocker chair and a table, along with general care and maintenance guidelines for various outdoor furniture materials.

Function Description

The Hanover Outdoor Furniture line includes a swivel rocker chair and a table, designed for residential outdoor use. The swivel rocker chair provides a comfortable seating option with both swiveling and rocking capabilities, allowing for dynamic movement and relaxation. The table serves as a functional surface for outdoor dining or leisure activities, often featuring a glass top. The furniture is constructed with durable and weatherproof materials, making it suitable for various outdoor environments.

Usage Features

Swivel Rocker Chair:

The swivel rocker chair is designed for ease of assembly and comfortable use. The assembly process involves attaching the chair frame to a swivel base and rocker assembly. A critical step in assembly is the correct placement of "U" metal plates, which ensure proper rocking motion and prevent damage to the structure. These plates must be positioned so that the "U" bar and rocker plate are between both sides of the "U" metal plate, with holes aligned for secure bolting. The bolts should initially be hand-tightened for a few revolutions on each side to allow for adjustments, and then fully tightened with the provided hex wrenches. Proper assembly is crucial for a safe, balanced rocking motion and to avoid voiding the warranty. Once assembled, arrow labels should be removed, and bolts covered with bolt covers for a finished look. The chair's design emphasizes stability and smooth operation, providing a pleasant outdoor seating experience.

Table:

The table assembly begins by placing the table rim upside down on a flat, non-abrasive surface. The table legs are then attached to the table rim using bolts and washers, with initial hand-tightening to allow for alignment adjustments. Subsequently, the legs are connected to a leg connector bracket, again with initial hand-tightening of bolts and nuts. After all components are loosely assembled, the bolts are progressively tightened in a cross-corner (X) fashion to ensure even pressure and proper alignment, preventing over-tightening which could strip the bolts. Once all bolts are tight, they are covered with bolt covers. Finally, with the help of another person, the table is turned upright, and the glass top is carefully placed inside the rim, resting on clear bumpers that are evenly spaced. This design ensures a stable and aesthetically pleasing outdoor table.

Maintenance Features

The Hanover Outdoor Furniture is designed for longevity with proper care and maintenance. General maintenance involves regular cleaning with a solution of mild detergent and water, followed by rinsing with clear water and thorough drying. For metal frames, applying a fine, clear automobile wax two to three times per year (or more frequently in high pollution areas) is recommended to protect against harmful ultraviolet exposure and salt air. It's important to note that some suntan and sun block products can be harmful to resin, cushions, straps, mesh, and vinyl lace, and contact with seating surfaces should be avoided to prevent deep penetrating stains not covered under warranty.

Specific Material Care:

Teak Furnishings: Teak naturally weathers to a soft, silver-grey over approximately nine months. Imperfections and grain rise due to expansion and contraction are natural. To maintain teak, use a soft-bristled utility brush to remove dust. For stubborn dirt, wash with a mild solution of four parts laundry detergent or dish soap to one part bleach in water, rinse thoroughly, and dry completely. Oiling teak may cause mildew or irregular coloring.
Woven Furnishings: Made of durable, weatherproof extruded polyethylene resin weave. Light stains can be removed with mild detergent and water. Mildew and heavy stains require a quality commercial outdoor furniture cleaner and protectant. Note that woven furnishings may not be suitable for intensely hot climates.
Fabric (Cushions): Outdoor fabrics are designed to endure sun, soil, and moisture. Wash with mild detergent and water, rinse thoroughly, and air dry completely by standing cushions on end. Mildew and heavy stains can be removed with a quality commercial outdoor furniture cleaner and protectant. Do not dry clean, machine wash/dry, steam, or use water above 100°F. Avoid contact between outdoor furniture cleaner and cushions to prevent discoloration. Do not use bleach on printed acrylic fabrics or solvent-type materials on woven vinyl, woven blend, or ultra woven blend fabrics, as these can damage the yarns. Chlorine-based cleaners should also be avoided.
Mesh: Light stains are removed with mild detergent and water, rinsed, and dried. Mildew and heavy stains require a quality commercial outdoor furniture cleaner and protectant.
Strap: For general cleaning, brush off dirt, apply a solution of mild detergent and warm water, allow it to soak, then gently clean with a sponge or soft-bristle brush, rinse thoroughly, and air dry.
Vinyl Strap: Apply a quality vinyl protectant to guard against air pollution, salt air build-up, and mildew. Rubbing alcohol applied with a soft cloth can remove difficult stains.
Stone and Marble Tops: Designed for normal outdoor use. Reseal the tabletop with the original sealer product when necessary to maintain natural beauty and prevent absorption of moisture and stainable materials. Clean spills like wine, soda, or coffee immediately with mild detergent and water. In extreme cold climates, store tabletops in a dry indoor area or cover with a suitable outdoor furniture cover, ensuring space for airflow to prevent moisture collection.

Warranty Information:

The furniture comes with a 1-year limited warranty covering manufacturing defects. This warranty is valid for the original purchaser with a sales receipt and covers product repair or replacement, as determined by the manufacturer. It does not cover normal wear and tear, damage from acts of nature, abuse, misuse, chemical damage, extreme temperatures, abrasion, excessive weight, improper installation, or commercial use. Certain items like components subjected to abuse, damage by retailers/shippers, normal wear, tears/punctures from improper use, frame/weld damage from improper assembly or water exposure, general frame rusting, fading/discoloration of fabrics, umbrella bases, and "as is" or floor models are not covered. For warranty claims, customers should call the toll-free customer service hotline with their sales receipt, a description of the problem, email, and phone number. Repairs or replacements are at the manufacturer's option, and the consumer is responsible for sales/use taxes, shipping, and handling. The warranty is exclusive and limited to the terms described, with no other express or implied warranties.