This document describes the Hanover Outdoor Furniture, specifically a table, and provides comprehensive information on its warranty, care, maintenance, and assembly.
Function Description:
The Hanover Outdoor Furniture product detailed in this manual is a table designed for outdoor use. It features a glass top, a table rim, table legs, and a leg connector bracket, suggesting a sturdy and aesthetically pleasing design suitable for various outdoor settings. The inclusion of an umbrella hole ring indicates its compatibility with outdoor umbrellas, providing shade and enhancing its utility for dining or leisure activities. The table is designed for residential use, emphasizing durability and resistance to outdoor elements.
Important Technical Specifications:
The table assembly involves several components with specific part numbers:
- Glass Top (A): Quantity 1. This is the primary surface of the table.
- Table Rim (B): Part # AT10283, Quantity 1. This forms the outer edge supporting the glass top.
- Leg Connector Bracket (C): Part # AT10284, Quantity 1. This component connects the table legs, providing structural stability.
- Table Leg (D): Part # AT10285, Quantity 4. These are the main supports for the table.
- 1/4" X 20 MM Bolt (E): Part # HW0035, Quantity 4. Used for securing components.
- 1/4" Nut (F): Part # HW0014, Quantity 8. Used with bolts for fastening.
- Ø6.5 X 1.0 MM Washer (G): Part # HW0004, Quantity 12. Provides even pressure distribution and prevents loosening.
- Bolt Cover (H): Part # HW0105, Quantity 4. Covers bolts for a cleaner appearance and protection.
- Nut Cover (I): Part # HW0027, Quantity 8. Covers nuts for aesthetic and protective purposes.
- Hex Wrench (J): Part # HW0009, Quantity 1. Tool for tightening hex bolts.
- Hex Bolt Driver (K): Part # HW0006, Quantity 1. Tool for driving hex bolts.
- Umbrella Hole Ring (Factory Assembly): Part # G0004. Allows for the insertion of an outdoor umbrella.
- Foot Cap (Factory Assembly): Part # FC0069. Protects the bottom of the table legs and floors.
- Table Bumper (Factory Assembly): Part # G0199. Provides cushioning and support for the glass top within the rim.
The assembly process involves hand-tightening bolts initially (2-3 turns) to allow for adjustments, followed by final tightening using the provided hex wrench and driver. It is crucial to tighten bolts in a cross-corner (X fashion) to ensure even pressure and prevent stripping. Over-tightening is explicitly warned against.
Usage Features:
The table is designed for normal outdoor residential use. Its construction with durable materials like extruded polyethylene resin weave (for woven furnishings, though the specific table material isn't explicitly stated, the general care section suggests robust outdoor materials) and a glass top makes it suitable for various weather conditions. The umbrella hole ring is a key feature, allowing users to add an umbrella for sun protection, enhancing comfort during outdoor activities. The design emphasizes stability and ease of assembly, with clear instructions provided. The product is not intended for commercial use.
Maintenance Features:
The manual provides extensive guidelines for the care and maintenance of Hanover Outdoor Furniture, ensuring longevity and preserving its appearance:
General Regular Maintenance:
- Cleaning: Wash furniture with a solution of mild detergent and water, rinse with clear water, and dry thoroughly.
- Protection: Apply a fine, clear automobile wax to metal frames two to three times per year (or more frequently in high pollution areas) to protect against harmful UV exposure and salt air.
- Stain Prevention: Avoid contact between suntan/sun block products and seating surfaces to prevent deep-penetrating stains, which are not covered under warranty.
Specific Material Care:
- Teak Furnishings:
- Aging: Teak naturally weathers to a soft, silver-grey over approximately nine months.
- Cleaning: Use a soft-bristled utility brush to remove surface dust. For stubborn dirt, wash with a mild solution of four parts laundry detergent/dish soap to one part bleach in water, rinse thoroughly, and dry completely.
- Oiling: Oiling may cause mildew or irregular coloring.
- Woven Furnishings (Extruded Polyethylene Resin Weave):
- Cleaning: Remove light stains with a solution of mild detergent and water, rinse, and dry. For mildew and heavy stains, use a quality commercial outdoor furniture cleaner and protectant.
- Climate Warning: May not be suitable for intensely hot climates.
- Fabric (Outdoor Cushions):
- Cleaning: Wash with a mild detergent and water solution, rinse thoroughly, and air dry completely (standing cushions on end). For mildew and heavy stains, use a quality commercial outdoor furniture cleaner and protectant.
- Warnings: Do not dry clean, machine wash/dry, steam, or use water above 100°F. Avoid contact between outdoor furniture cleaner and cushions to prevent discoloration. Do not use bleach on printed acrylic fabrics or solvent-type materials on woven vinyl, woven blend, or ultra-woven blend fabrics. Do not use chlorine-based cleaners.
- Mesh:
- Cleaning: Remove light stains with a mild detergent and water solution, rinse, and dry. For mildew and heavy stains, use a quality commercial outdoor furniture cleaner and protectant.
- Strap:
- Cleaning: Brush off dirt, apply a mild detergent and warm water solution, allow to soak, then gently clean with a sponge or soft-bristle brush, rinse thoroughly, and air dry.
- Vinyl Strap:
- Protection: Apply a quality vinyl protectant to guard against air pollution, salt air build-up, and mildew.
- Stain Removal: Use rubbing alcohol applied with a soft cloth for difficult stains.
- Stone and Marble Tops:
- Maintenance: Reseal the tabletop with the original sealer product when necessary to maintain natural beauty and prevent moisture/stain absorption.
- Spill Cleaning: Clean spills (wine, soda, coffee, etc.) immediately with a mild detergent and water.
- Cold Climates: In extreme cold, store tabletops in a dry indoor area or cover with a suitable outdoor furniture cover, ensuring space for airflow to prevent moisture collection.
The product comes with a 1-Year Limited Warranty Program.
- Coverage: Covers manufacturing defects for one year from the purchase date. Valid only with the original sales receipt. Replacements revert to the original purchase date for future warranty.
- Exclusions: Does not cover normal wear and tear, damage from acts of nature (freezing, high winds), abuse, misuse (chemical damage from suntan oil, extreme heat/cold, abrasion, excessive weight), improper installation/use, retailer/shipper/installation crew damage (scratches, dents, tears), normal wear that still functions, tears/punctures/scratches from improper installation/use, frame rusting, fading/discoloration of fabrics/cushions/straps/wicker from elements/chemicals, umbrella bases, or "as is" items/floor models.
- Claims: To make a claim, call the toll-free customer service hotline at 1-800-416-3511 (Monday-Friday, 9:00 AM - 5:00 PM Eastern Time) or visit www.hanover-products.com. Provide the original sales receipt, a brief problem description, email address, and daytime phone number. Repairs or replacements are at the manufacturer's option. Sales tax, shipping, and handling are the consumer's responsibility.
- Limitations: This is an exclusive express limited liability. Manufacturer disclaims other express or implied warranties, including those of retailing dealers. Remedy is limited to repair or replacement of defective product/component. Manufacturer is not liable for incidental, indirect, special, or consequential damages.
Customer Support:
For any problems (missing/damaged parts, assembly issues), customers are advised NOT to return to the retailer/store. Instead, contact the customer service hotline at 1-800-416-3511 or visit www.hanover-products.com. Retain the instruction sheet, warranty card, and receipt for future warranty claims. Online support for assembly, troubleshooting, and care/maintenance is also available on the website.
To Next Page
Need help?
General
