Hanseatic AC925EC3-S00E - Automatic and Vitality Programs; Automatic Programs Overview; Vitality Programs Guide

Automatic programs and vitality programs
Page EN-25
Automatic programs and vitality programs
Automatic programs
The device has 10 automatic programs which
give you the right settings for many applica-
tions. Please refer to “Table of automatic
programs” on page EN-26 when selecting the
programs.
Some programs require you to weigh the food
beforehand, in order to enter the weight later.
For other programs, you must enter the num-
ber, or the quantity is fixed.
1. Select the “Auto menu” function using the
“+30s” control dial (11).
On the display (7), the
Auto Menu
indicator will
illuminate and the
A1 indicator will appear.
2. Set the desired automatic program using
the “Confirm/Start” control dial (14).
3. Press the “Confirm/Start” control dial (14)
to confirm the setting.
The
Auto Menu
indicator, the indicator for the
selected automatic program and the indi-
cator for the lowest amount/quantity are
now shown on the display (7).
4. Set the desired amount/quantity using the
“Confirm/Start” control dial (14).
5. Press the “Confirm/Start” control dial (14)
to confirm the setting.
The program starts.
During operation, the
Auto Menu
indicator will
flash and the countdown for the cooking
time will be shown.
Vitality programs
There are 9 available vitality programs.
Please refer to “Table of vitality programs”
on page EN-27 when selecting the programs.
Before getting started
1. Oil the grill pan (6) a little and place the
food on it.
(6)
(5)
2. Place the grill pan (6) on the grill rack (5)
and place both onto the turntable (2).
Using the vitality programs
1. Press the “VITAL” button (15).
The
Healthy Fry
and H1 indicators will appear
on the display (7).
2. Select the desired vitality program using
the “Confirm/Start” control dial (14).
3. Press the “Confirm/Start” control dial (14)
to confirm the setting.
The program starts.
During operation, the
Healthy Fry
indicator will
flash and the countdown for the cooking
time will be shown.
A beep will sound when the cooking process
is finished. The display will flash for a few
minutes, (7) and the turntable (2) will continue
to rotate. The food will be kept warm during
this time.