To Next PageTo Next PageWhy is the compressor switched off in my Hanseatic HGS17060EW?
If your Hanseatic Freezer's compressor is off, it could be due to a few reasons. First, check if the socket has power by plugging in another appliance. Ensure the mains plug is securely plugged in. Also, the compressor might be off because the desired temperature has been reached; it will automatically switch on again when the inside temperature rises.
What to do if Hanseatic HGS17060EW Freezer does not cool sufficiently?
If your Hanseatic Freezer is not cooling sufficiently, there are several potential causes. Ensure the temperature controller is set appropriately, adjusting it towards "MAX". If the door isn't tightly closed, or the door seal isn't completely tight, please refer to chapter „Cleaning the door seal“ on page EN-21. Check if the freezer is near a heat source and, if so, place an insulating plate between them or relocate the freezer. Make sure you only place chilled food in the freezer. Finally, verify that the ambient temperature is within the recommended range (refer to chapter „Intended use“ on page EN-4).
How to stop my Hanseatic HGS17060EW Freezer from cooling too much?
If your Hanseatic Freezer is cooling excessively, it's likely that the temperature is set too high. Try adjusting the temperature controller one step further towards "MIN".
Why is my Hanseatic Freezer making so much noise?
Some noises are normal during the operation of Hanseatic Freezer. Humming indicates the cooling unit is running. Flowing noise means that refrigerant is flowing through the pipes. Clicking means that motor is switching on or off. To address other noises, ensure the freezer is firmly positioned. You may also need to remove objects from the freezer or any foreign bodies from the rear, ensuring sufficient clearance from the wall.
Lists the items included with the freezer upon purchase.
Outlines essential checks to perform before initial operation.
Specifies the approved purposes and limitations for the appliance.
Provides definitions for key terms used throughout the user manual.
Explains the meaning of various symbols and icons used in the manual.
Presents general safety guidelines to ensure user protection and third-party safety.
Details potential dangers and precautions when operating electrical appliances.
Provides guidance on how to safely move and unpack the freezer.
Advises on choosing the optimal placement for the freezer.
Explains climate categories and their impact on appliance performance.
Step-by-step instructions for reversing the freezer door hinges.
Instructions for attaching the door handle to the appliance.
Guidance on correctly placing and levelling the freezer.
Details the process of connecting the freezer to the power supply.
Explains how to adjust the internal temperature of the freezer.
Describes the process and principles of freezing food correctly.
Information on the appliance's maximum freezing capability.
Advice on freezing food within the specified capacity limits.
Instructions for freezing food in quantities exceeding the standard capacity.
Steps to follow for making ice cubes inside the freezer.
Provides helpful advice for optimal freezing and storage.
Instructions for cleaning the exterior and interior surfaces.
Guidance on the process of defrosting and cleaning the freezer.
Method for cleaning and checking the freezer door seal.
How to seek advice, report issues, or place orders for parts/accessories.
Information regarding the availability of repairs and spare parts.
Contact details for technical service in Germany.
Contact details for customer service in Austria.
Guidelines for environmentally sound disposal of old appliances.
Highlights the appliance's environmental features and packaging.
General
