What to do if the Hanseatic Dishwasher cannot be switched on?
If your Hanseatic Dishwasher won't turn on, first ensure the mains plug is properly inserted into the socket. If it is, check the fuse and test the socket with another device to ensure it's supplying voltage.
Why won't the selected program start on my Hanseatic WQP8-7636, or why does it stop?
If the selected program on your Hanseatic Dishwasher won't start or stops, it could be due to a few reasons: * Ensure the dishwasher door is fully closed. * Make sure the water tap is completely turned on.
What to do if water is not running into my Hanseatic WQP8-7636, or is running very slowly?
If water isn't running into your Hanseatic Dishwasher or is flowing very slowly: * Check the inlet hose for any kinks and ensure it's laid out properly. * Make sure the water tap is fully open.
What to do if Hanseatic WQP8-7636 has water overflow?
If there is a water overflow, switch off the tap. Find the gap in the seal (or have someone find it) and repair the leak (or have it repaired).
What to do if water is not running off or only very slowly from Hanseatic Dishwasher?
If water isn't draining properly from your Hanseatic Dishwasher, the filters may be blocked. Also, inspect the outlet hose to ensure it is not kinked, extended, or hanging too high or low.
Why is the LED illuminated on my Hanseatic WQP8-7636 Dishwasher even after adding dishwasher salt?
If the LED is illuminated on your Hanseatic Dishwasher even after adding salt, the dishwasher salt may be clumpy. Stir the salt using the end of a spoon or a similar utensil.
Why does it take too long for the water to fill up in Hanseatic Dishwasher?
If it takes too long for the water to fill up in your Hanseatic Dishwasher, ensure that the water tap is completely turned on.
What to do if Hanseatic WQP8-7636 can be switched on/off, but cannot be operated?
If your Hanseatic Dishwasher switches on but won't operate, ensure the door is fully closed, as it can only be operated when the door is closed.
General| Capacity | 13 place settings |
|---|---|
| Energy efficiency class | E |
| Noise level | 44 dB |
| Number of programs | 6 |
| Type | Freestanding |
| Delay start | Yes |
| Child lock | Yes |
| Size | Full-size |
Lists all items included in the dishwasher package, such as the appliance and accessories.
Details the steps to verify the delivery is complete and undamaged upon arrival.
Identifies buttons, LEDs, and indicators on the dishwasher's front control panel.
Identifies internal parts like racks, baskets, spray arms, and dispensers.
Defines the dishwasher's purpose and clarifies warning symbols used in the manual.
Provides crucial general safety instructions for operating the appliance.
Highlights dangers associated with electrical hazards and proper handling.
Warns about suffocation, injury risks to children, and potential fire hazards.
Outlines potential injuries from incorrect operation or physical contact.
Addresses safety considerations for children and individuals with limited capacities.
Covers risks of explosion, poisoning, injury, and scalding during use.
Warns about trip hazards from open doors and damage from improper handling.
Guidance on using all-in-one dishwasher tabs and when to use them.
Instructions for correctly filling the detergent dispenser for optimal cleaning.
Instructions on how to fill and adjust the rinse aid dispenser for spot-free dishes.
How to modify rinse aid settings for improved drying and reduced foaming.
Steps for filling the dishwasher salt reservoir to prevent limescale.
Lists items that should not be washed in the dishwasher to prevent damage.
Guidance on optimally placing small to medium items in the upper rack.
Instructions on how to change the height of the upper dish rack for better loading.
Guidance on optimally placing large items in the lower rack.
Tips for loading cutlery for best cleaning results and safety.
Details different wash cycles, their applications, duration, and consumption.
Steps required before starting a wash cycle and how to initiate it.
Explains features like delayed start and half load that can be combined with programs.
Specifics on using the half load function to reduce water and power consumption.
How to activate and deactivate the child lock feature for safety.
Safe procedure for removing clean dishes after the cycle finishes.
How to interrupt an active program and select a new one.
Procedure for adding extra dishes mid-cycle if it has only been running briefly.
Instructions for cleaning the exterior panels and door seals.
Steps for removing and cleaning the dishwasher's internal filters.
How to clean the upper and lower spraying arms to maintain performance.
Recommendations for using special cleaning products for intensive cleaning.
Measures to prevent appliance damage from freezing temperatures.
Criteria for selecting the optimal site for dishwasher installation.
Steps for positioning the dishwasher correctly and leveling it.
Guidance on connecting the drain hose to a sink siphon or floor drain.
Instructions for connecting the water supply hose to a tap.
Safety precautions and requirements before connecting the appliance to power.
Requirements for fitting the dishwasher beneath a continuous worktop.
Explains the significance of water hardness for cleaning performance and settings.
Step-by-step guide to setting the water hardness level on the appliance.
Procedure for the initial test run to check functionality and remove residues.
Common operational issues and their corresponding corrective actions.
Explanation of error codes displayed by the appliance and their solutions.
Troubleshooting steps for common issues like residues or unclean dishes.
Contact information for customer service, ordering, and reporting issues.
Details on obtaining technical service and replacement parts for the appliance.
Guidelines for responsible disposal of electronic waste in an environmentally friendly manner.
Information on the environmentally friendly and recyclable nature of packaging materials.
Key technical data, dimensions, and operating parameters of the appliance.
To Next Page