Hansol Scalable All In One Series User Manual

ELSR722-00004 / ELSR103-00001
Installation Manual
Scalable All In One
ELSR722-00004: Battery Tray (ELPT362-00004) x 2
ELSR103-00001: Battery Tray (ELPT362-00004) x 3
Use this product only at home.
Read the manual and all other available information.1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Attend Hansol installation training course/s. This course/s is recommended before the distributor
Provides an ESS.
Register as a Hansol installer.
Be compliant with CEC accreditation requirements for grid connect systems with batteries, which
currently requires o-grid installation accreditation.
Visit the installation site prior to quoting.
Check that the switchboard has room, or is suitable for, additional connection/s (e.g. external meter for
ESS 3.6 model).
Be aware of Dangerous Goods Class 9 regulations for transport, storage and handling of lithium
batteries.
Be aware of Building Code regulations for battery installations.
Read the manual again.
Ensure you have the latest version of the installation manual, which can be downloaded from your
distributor’s website.
The internet connection is required to use all functions of the ESS system.
If you have a problem, please contact the installer.
The Specications of the product may be modied without prior notice to improve product quality.
Do not operate with other components not approved by the ESS systems.
(Connecting other products in parallel to Hansol Technics’s products may result in abnormal operation.)
CAUTION
CAUTION
Australia (Eng.) 11/2016. Rev1.0

Hansol Scalable All In One Series Specifications

General

Brand	Hansol
Model	Scalable All In One Series
Category	Camera Accessories
Language	English

Summary

Safety

Intended Use

Specifies the intended residential use of the Scalable All in One system for solar and battery storage.

Safety Precautions

Details essential safety measures, PPE, and handling precautions for the system.

Product Overview

Basic Specifications

Provides detailed technical specifications for PV generation, battery, and grid connection.

Grounding the PV Inverter

Recommends proper grounding methods for the PV inverter frame and surfaces.

Fail-safe actions upon power failure

Explains system behavior and backup modes during power outages.

Installation

Selection of Installation Location

Guidelines for choosing a safe and optimal location for installing the system.

Possible locations for installation

Specifies suitable indoor/outdoor locations, ventilation, and environmental considerations.

Minimum Clearance

Defines the required clearance around the unit for safe operation and ventilation.

Position (Location Selection)

Guidance on positioning the unit on a flat surface and ensuring ventilation.

Mounting Instructions

Provides instructions and specifications for mounting the system using anchor bolts.

Electrical Connections

The Overview of Electrical Connection

Opening the Side Case Cover

The Overview of the Connection Area

Battery Installation

Instructions for installing the battery trays for 7.2 kWh and 10.8 kWh systems.

Closing the Side Case Cover

Distribution Box Connections

Details on AC/DC breakers, RCD, and the distribution board connection.

Grid Switch Box Connection between Grid and System

Instructions for connecting the Grid Switch Box for power supply and bypass.

Connecting Method of DC and AC Line

Explains the connection of DC (PV) and AC lines, including wire standards.

Mounting

Operation Test

Starting the System

Turning off the System

Descriptions of Operation Mode

Problem Confirmation

General System Events and Warnings

Significant Events

Maintenance

Component Checks

Battery Maintenance Procedures

Procedures for battery maintenance, including problem checks and exchange.

Technical Specifications

Disassembly

System Disassembly Procedures

Safety Precautions