Need help?Do you have a question about the Hantarex MTC 9000 and is the answer not in the manual?
General| Category | Monitor |
|---|---|
| Chassis | MTC 9000 |
| Tube Type | CRT |
| Vertical Frequency | 50-60 Hz |
| Deflection Angle | 90 degrees |
| Aspect Ratio | 4:3 |
| Display Type | CRT |
| Input | Composite video |
| Input Signal | Analog RGB |
Lists various improvements and features of the MTC 9000 monitor.
Instructions for connecting the monitor's power supply.
Guidelines for grounding the monitor chassis and heat sinks.
Information on minimizing and controlling X-ray radiation.
Warnings about high voltages (Extra High Tension) within the monitor.
Handling precautions for the Cathode Ray Tube due to vacuum and pressure.
Details of the monitor's X-ray protection circuit.
Specifications for the monitor's power supply requirements.
Details on RGB signal input characteristics and impedance.
Specifications for horizontal and vertical sync signal inputs.
Operational horizontal and vertical scanning frequency ranges.
List of adjustable controls for display parameters.
Check of the high tension line voltage for the monitor.
Adjusting RGB gain controls for correct video output levels.
Procedure for adjusting white balance and brightness.
Steps to adjust amplitude, frequency, phase, and contrast.
To Next Page
