Operating Data Logger
USER’S MANUAL 24
Connect Data Logger probes (HT325) with DMM-365 as illustrated in the following figure:
Figure 2-13
Then, the following figure will be displayed on the screen:
Figure 2-14 Resistance Measurement
2.4 Making a Diode Measurement
To make a measurement on the diode, follow these steps:
1) Click the “Diode” key and a diode symbol appears at the top of the screen.
2) Connect the black lead into the COM banana jack input and the red lead into the V/Ω/C banana
jack input.
3) Connect the red and black leads to the diode and the voltage value of the diode is displayed on
the screen in volt.
To Next Page
Loading...