Need help?Do you have a question about the Hantek HDG2102B and is the answer not in the manual?
Implementing AM and FM modulation on carrier waveforms.
Implementing phase modulation on carrier waveforms.
Implementing FSK modulation for frequency shifting.
Implementing PWM for varying pulse width.
Configuring and performing frequency sweep operations.
Generating waveforms in burst mode with specified cycles.
Alphabetical listing of all SCPI command subsystems.
Commands for Amplitude Modulation (AM).
Commands for Amplitude Shift Keying (ASK).
Commands for Binary Phase Shift Keying (BPSK).
Commands for controlling burst mode operation.
Commands for instrument calibration.
Commands for counter and frequency meter functions.
Commands for managing user-defined arbitrary waveforms.
Commands for Frequency Modulation (FM).
Commands for setting output frequency.
Commands for Frequency-Shift Keying (FSK).
Commands for selecting output waveform functions.
Commands for generating harmonic waveforms.
Commands for controlling sweep markers.
Commands for managing stored states.
Commands for file system operations (USB, SD card).
Commands for controlling channel output and sync signals.
Commands for adjusting waveform phase.
Commands for Phase Modulation (PM).
Commands for Phase Shift Keying (PSK).
To Next Page
General
