Need help?Do you have a question about the Haojue DR160 and is the answer not in the manual?
General| Displacement | 162 cc |
|---|---|
| Max Torque | 14 Nm @ 6500 rpm |
| Fuel System | Electronic Fuel Injection (EFI) |
| Transmission | 5-Speed |
| Front Suspension | Telescopic Fork |
| Front Brake | Disc |
| Rear Brake | Disc |
| Seat Height | 790 mm |
| Ground Clearance | 170 mm |
| Engine Type | Single-cylinder, 4-stroke, air-cooled |
| Rear Suspension | Monoshock |
| Fuel Tank Capacity | 12 L |
| Weight | 148 kg |
Details crucial break-in procedures for optimal motorcycle performance and longevity.
Guidance on selecting and installing accessories safely to avoid affecting rider stability.
Essential advice for safe motorcycle operation, including gear and riding practices.
Overview of motorcycle controls and identification of key parts.
Specific precautions for riding in adverse road conditions.
Locating and identifying the VIN and engine number for registration and service.
Instructions on ignition switch operation and proper key care.
Describes the dashboard self-checking process and component functions.
Explains the function of the tachometer and speedometer.
Explains how to reset the oil change indicator after maintenance.
Diagram and labels for the left handlebar control switches.
Explains the function of the clutch lever and its associated switch.
Diagram and labels for the right handlebar control switches.
Instructions for opening and closing the fuel tank cap.
Details on the 5-speed transmission and proper shifting techniques.
Step-by-step guide for starting a cold engine, including preheating.
Safe procedures for starting the motorcycle and moving off.
Guidance on smooth transmission operation and selecting appropriate gears.
Steps for safely stopping and parking the motorcycle.
Emphasizes maintaining a safe stopping distance from the vehicle ahead.
Table detailing inspection intervals for various motorcycle components.
Table outlining lubrication intervals for key parts.
Guidance on battery removal, installation, and recharging.
Procedure for inspecting, replacing, and installing spark plugs.
Instructions for checking and changing engine oil.
Daily checks for brake fluid level, leaks, and pad wear.
Checking front brake fluid level and inspecting for pad wear or leaks.
Procedure to adjust the rear brake pedal position correctly.
Importance of checking tire pressure and wear for safety and life.
Checking tire wear indicators and for damage like punctures.
Details on recommended tire sizes for optimal performance and stability.
Checks for fuel, battery, fuses, and spark plug for starting problems.
Instructions to drain fuel before transporting the motorcycle.
Recommendations for storing the motorcycle properly during off-seasons.
Guidance on removing, cleaning, storing, and recharging the battery.
Checking battery appearance and terminal voltage before initial use.
Recommends standard charging and using a well-ventilated area.
Warns about flame, short circuits, and loose terminals to prevent battery explosion.
Details dimensions, weight, wheelbase, ground clearance, and load capacity.
Covers engine type, bore, stroke, displacement, compression, and power.
Details clutch type, gear transmission, and gear ratios.
Includes fuel consumption, maximum speed, climbing ability, and braking distance.
Lists ignition method, spark plug, battery, fuse, and lights.
Details fuel tank capacity, reserve, and engine oil capacity.
To Next Page
