Harbinger V2212 - Specifications

TM
POWERED LOUDSPEAKERS
V2212 & V2215
7
V2212 and V2215 Owner's Manual
SPECIFICATIONS
HARBINGER VâRi Series V2212 V2215
Amplifier
Input 1
XLR / TRS Balanced input with Mic/Line
Switch (-45dB/-10dB) and Input Gain
Control
XLR / TRS Balanced input with Mic/Line
Switch (-45dB/-10dB) and Input Gain
Control
Input 2
XLR +4dB Balanced jack, RCA -10dB
Unbalanced Jacks and Input Gain Control
XLR +4dB Balanced jack, RCA -10dB
Unbalanced Jacks and Input Gain Control
AUX Input
1
/
8
” Mini TRS Unbalanced Jack(-10dB) For
mobile audio devices. Direct To Master
Volume Control
1
/
8
” Mini TRS Unbalanced Jack(-10dB) For
mobile audio devices. Direct To Master
Volume Control
Line Output XLR line output +4dB XLR line output +4dB
Power Output RMS @ 180 watts / 600 watts Peak RMS @ 180 watts / 600 watts Peak
Low EQ +/-12dB Shelf, 100Hz +/-12dB Shelf, 100Hz
High EQ +/-12dB Shelf at 10kHz +/-12dB Shelf at 10kHz
Volume
volume control per channel / main volume
control
volume control per channel / main volume
control
Power Input 115V/60 Hz 115V/60 Hz
Features
Class-D Amplifier Design Class-D Amplifier Design
Removable AC Power Cord Removable AC Power Cord
Signal / Clip LED Signal/Clip LED
Power LED Power LED
Speaker
Type 12˝ 2- way vented design 15˝ 2-way vented design
Frequency Response 55-20K Hz 45-20K Hz
Max SPL 118dB (at max amp output) 120dB (at max amp output)
HF Driver 1.35˝ Compression Driver, 8 Ohm 1.35˝ Compression Driver, 8 Ohm
LF Driver 12˝ Driver With 2" Voice Coil, 4 Ohm 15˝ Driver With 2.5" Voice Coil, 4 Ohm
Cabinet
Molded Plastic Construction with Top and
Side Handles
Molded Plastic Construction with Top and
Side Handles
Grille 1.2mm steel 1.2mm steel
Suspension Points V2212 Is Not Designed For Suspension V2215 Is Not Designed For Suspension
Pole Mount 35mm stand pole with M6 screw 35mm stand pole with M6 screw
Product Dimensions 385x348x596mm 460x415x702mm
Packaging
Information
Packaging Size 445x415x680mm 520x470x775mm
Net Weight 16kg 19kg
Gross Weight 17.5kg 20.5kg