Need help?Do you have a question about the Harbinger V1012 and is the answer not in the manual?
Basic setup and initial adjustments for optimal speaker placement and stability.
Guidance on connecting various audio sources to the speaker's inputs for optimal signal flow.
Step-by-step instructions for safely powering on the speaker and adjusting volume levels.
Explanation of the SIG/CLIP LED function and how to interpret signal and distortion levels.
Tips for using the speaker as a floor monitor, focusing on EQ adjustments for feedback reduction.
Instructions on how to connect multiple VâRi speakers together for a larger sound system.
Details on AUX INPUT, INPUT 1 (XLR/TRS), and INPUT 2 (XLR/RCA) for audio sources.
Explanation of EQUALIZER, MASTER VOLUME, SIG/CLIP LED, and PWR LED functions.
Information on LINE OUT for linking speakers and the IEC power input and fuse carrier.
General| Power | 1000W |
|---|---|
| LF Driver Size | 12" |
| Woofer Size | 12" |
| Outputs | 1 x XLR (mix out) |
| Power Amp | Class D |
| Crossover Frequency | 2.5kHz |
| Maximum Peak SPL | 123 dB |
| Enclosure Material | Polypropylene |
| Type | Powered PA Speaker |
| Input Connectors | XLR, 1/4", RCA |
To Next Page