Harbinger V1012 - SPECIFICATIONS

9
V1012 and V1015 Owner’s Manual
TM
POWERED LOUDSPEAKERS
V1012 & V1015
SPECIFICATIONS
Harbinger Vâri Series
V1012
V1015
Amplifier
Input 1
XLR/TRS balanced input with MIC/LINE
switch and INPUT GAIN control
XLR/TRS balanced input with MIC/LINE
switch and INPUT GAIN control
Input 2
XLR +4dB balanced jack, dual (stereo)
RCA -10dB unbalanced jacks, and input
gain control
XLR +4dB balanced jack, dual (stereo)
RCA -10dB unbalanced jacks, and input
gain control
AUX Input
1/8” mini TRS -10dB unbalanced jack for
phone, computer, or mobile audio devices.
Direct to master volume control.
1/8” mini TRS -10dB unbalanced jack for
phone, computer, or mobile audio devices.
Direct to master volume control.
Line Output
XLR line output +4dB XLR line output +4dB
Power Output
RMS @ 100 watts / 400 watts Peak RMS @ 100 watts / 400 watts Peak
Low EQ
+/-12dB shelf, 100Hz +/-12dB shelf, 100Hz
High EQ
+/-12dB shelf at 10kHz +/-12dB shelf at 10kHz
Volume
Controls for INPUT 1, INPUT 2 and MASTER
VOLUME
Controls for INPUT 1, INPUT 2 and
MASTER VOLUME
Power Input
110-120V/60 Hz 110-120V/60 Hz
Features
Class-D amplifier design
Removable AC power cord
Signal/Clip LED
Power LED
Class-D amplifier design
Removable AC power cord
Signal/Clip LED
Power LED
Speaker
Type
12” 2- way vented design 15" 2-way vented design
Frequency
55–20kHz 45–20kHz
Max SPL
118dB (at max amp output) 119dB (at max amp output)
HF Driver
1.35" Compression Driver, 8 Ohm 1.35” Compression Driver, 8 Ohm
LF Driver
12” Driver with 2” Voice Coil, 4 Ohm 15” Driver with 2” Voice Coil, 4 Ohm
Cabinet
Molded plastic construction with top and side
handles
Molded plastic construction with top and
side handles