Need help?Do you have a question about the Harbinger V2218S and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Maximum SPL | 135 dB |
| Enclosure Material | MDF |
| Enclosure Type | Bass Reflex |
| Driver Size | 18 in |
| Input Types | 2 x XLR/TRS Combo |
| Outputs | 2 x XLR Thru |
All safety and operating instructions should be read and retained for future reference.
Adhere to all warnings on the amplifier and in the operating instructions.
Handle power cords with care, use correct outlets, and protect cords.
Do not expose the amplifier to water/moisture or operate near water sources.
Use recommended carts/stands, avoid wall/ceiling mounting, and keep away from heat sources.
Do not spill liquids, avoid object entry, and service only by qualified personnel.
Clean with a dry cloth and avoid getting water inside. Refer servicing to qualified personnel.
Ensure ventilation slots are not blocked to protect the product from overheating.
Unplug during lightning storms or periods of non-use to prevent damage.
Use manufacturer-specified parts and perform safety checks after repairs.
Always use the correct rating and type of fuse as indicated on the rear panel.
Product is not designed for suspension; any attempt may result in injury or death.
XLR outputs for sending signal through crossover or linking.
Combo XLR/TRS inputs for line-level signals from mixers or other speakers.
Switches between internal crossover or link mode for signal output.
Determines crossover point for high-pass filter to outputs.
Toggles front LED function between power indicator and limiter engagement.
Alters the polarity of the input signal; default '0' setting leaves phase unaffected.
Adjusts the volume of the internal speaker.
Indicates signal presence (blue) or distortion/clipping (red).
Indicates when the unit is connected to power and the switch is on.
Connection port for the AC power cable.
Housing for the main fuse.
Turns the subwoofer ON or OFF.
Covers materials and workmanship for two years from purchase date.
Explains FCC rules for digital devices and potential interference.
To Next Page