16
Lowes.com/harborbreeze
H
AA
E
II
JJ
I
H
LL
FINAL INSTALLATION
4. Secure the canopy (B) with mounting bracket screws
(HH) previously removed (Step 4, page 8). Tighten all
mounting bracket screws (HH) securely.
Hardware Used
HH
Mounting Bracket
Screw
x 4
5. Align blade arm (H) studs with their corresponding
holes in the blade (I) and then insert the blade screw
(II), blade washer (JJ) and rubber washer (LL) to
attach one blade arm (H) to a blade (I). Tighten the
blade screw (II). Repeat for each blade (I).
Hardware Used
II
Blade Screw x 5
Blade Washer x 5
Rubber
Washer
x 5
6. Slide the two holes of a blade arm (H) over the two
motor screws (AA) preassembled on motor assembly
(E). Tighten motor screws (AA) to secure blade arm
(H). Repeat for remaining blade arms (H).
Hardware Used
AA
Motor Screw x 10
B
HH
4
5
6
JJ
LL
Stud
To Next Page
Loading...
