Harbor Freight Tools CENTRAL PNEUMATIC 39170

To Next Page

39170

ASSEMBLY & OPERATING INSTRUCTIONS

STEEL BLASTER CABINET

FLOOR MODEL

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

any artwork contained herein may be reproduced in any shape or form without the express

written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

Brought to You by Augusta Flint

Need help?

Do you have a question about the Harbor Freight Tools CENTRAL PNEUMATIC 39170 and is the answer not in the manual?

Summary

Safety Instructions

General Operator Precautions

Safety advice for operators including clothing, hair, eye, ear protection and footing.

Work Area Requirements

Before Operating

Grounding and Voltage Safety

Proper Outlet and Plug Usage

Instructions for using 110-120V outlets, three-prong plugs, and adapters.

Extension Cord Guidelines

Assembly Instructions

Installing the Fluorescent Light

Replacing the Fluorescent Bulb

Operating the Blaster Cabinet

Select Nozzle and Connect Air Hose

Choose appropriate nozzle, connect sand input hose and air input hose to gun.

Set Compressor Pressure

Adjust compressor regulator to 40-80 PSI, do not exceed maximum.

Prepare for Blasting

Place material, close door securely, and position hands in gloves.

Blasting Procedure

Grip gun, aim nozzle at material, press trigger, and move gun for blasting.

Inspect and Complete Blasting

Replacing Nozzles and Air Jets

Unpacking and Parts Check