Harbor Freight Tools CoverPro 62860 User Manual

Vehicle not included.
Visit our website at: http://www.harborfreight.com
Email our technical support at: predator@harborfreight.com
WARNING! TO PREVENT SERIOUS
INJURY: Do not start or operate any internal
combustion engine inside or near Shed.
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 23b
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2023 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Harbor Freight Tools CoverPro 62860 Specifications

General

Brand	Harbor Freight Tools
Model	CoverPro 62860
Category	Tent
Language	English

Summary

Warning Symbols and Definitions

Safety Alert Symbol Definitions

Explains DANGER, WARNING, CAUTION, and NOTICE symbols.

Safety Icon Meanings

Describes hazards for eye, head, hand, and respiratory protection.

Important Safety Information

Assembly Precautions

Guidelines for safe and proper assembly procedures.

Use Precautions

Essential safety rules for operating the portable garage.

Specifications

Assembly Instructions

Frame Assembly Overview

Initial steps and overview of frame construction.

Roof Frame Assembly

Roof Assembly Overview

Visual guide to the roof frame structure.

Ridge Assembly

Instructions for connecting ridge connectors and rails.

Foot, Leg, and Stud Assembly

Corner Leg Assembly

Attaching the corner legs to the corner studs.

Stud Installation

Stud Installation Procedure

Installing center and corner studs into the roof assembly.

Studs Installed on Both Sides

Visual confirmation of studs correctly placed on both sides.

Anchoring Frame

Verify and Adjust Frame Measurements

Ensuring the frame is square and dimensions are correct.

Anchoring Procedure

Steps for securing the frame to the ground using anchors.

Securing Ratchet Tie-Downs

Releasing Ratchet Tie-Downs

Door and Back Cover Installation

Door Cover Installation

Positioning and attaching the front door cover.

Wrap Around Side Connectors

How side connectors interact with the door cover flaps.

Securing Door Cover

Using tie-downs to secure the door cover to the frame.

Roof Cover Installation

Align Roof Cover with Frame

Initial placement of the roof cover onto the frame.

Position Top Cover

Final positioning of the roof cover using ropes.

Maintenance

Monthly Inspection

Regular checks for wear, damage, and secure connections.

Cleaning

Cleaning Procedures

Guidelines for removing debris and washing the cover.

Record Product's Serial Number

Parts List and Diagram

Parts List

Detailed list of all components included in the kit.

Assembly Diagram

Limited 90 Day Warranty