Need help?Do you have a question about the HARD KORR 10A SOLAR CHARGE CONTROLLER and is the answer not in the manual?
Shows the primary operational status of the charge controller.
Adjusts the voltage level for maintaining battery charge.
Sets the voltage at which the load output reconnects.
Sets the voltage at which the load output disconnects.
Configures the timer for the load output operation.
Allows selection of the correct battery chemistry for charging.
General| Rated Current | 10A |
|---|---|
| Input Voltage | 12V/24V Auto |
| PWM Charging | Yes |
| Display Type | LCD |
| Max Solar Input Voltage | 50V |
| Protection Features | Overcharge, Over-discharge, Short circuit |
| Battery Type | Gel, Flooded |
To Next Page