HARD KORR 10A SOLAR CHARGE CONTROLLER - Product Features Overview

PRODUCT FEATURES
1. Built-in industrial class microprocessor.
2. Large LCD display with user-friendly interface.
3. 5-stage PWM charge management with separate programs for
AGM, Wet and Gel batteries.
4. Built-in short circuit protection, open circuit protection, overload
protection and reverse charge protection.
5. Dual MOSFET reverse polarity protection.
6. Can power devices directly via dual USB ports or positive/
negative terminals (denoted by icon)
reading
solar panel load
output
battery level
charge mode
on: equalization/bulk
flashing: float
unit of
measure
LCD DISPLAY
switch between different displays (long press to exit settings)
press to increase value
press to decrease value