HARDI-EVRARD ALPHA PLUS 4100 - Four-Wheel Steering Operation; Engaging Four-Wheel Steering Mode

ALPHA PLUS HARDI NOVA
DD EE SS CC RR II PP TT II OO NN AA NN DD OO PP EE RR AA TT II OO NN
CHAPTER
22-
14
- Keep the pedal depressed as long as 4-wheel-steering is required.
-The green warning lamp is activated (front and rear wheels are in
straight position)
- Front and rear wheels steer in opposite direction.
When the wheels are turned,the red warning lamp goes out but
green warning lamp is still activated..
To return to 2-wheel-steering :
- Release the pedal
- Turn the steering control so as to return the rear wheels to the
straight position,
‘REAR’ and ‘FRONT ’ warning lamp light up. Green
warning lamp goes out.
44- wwhheeeell sstteeeerriinngg iiss ooppeerraattiinngg
22- wwhheeeell sstteeeerriinngg iiss ooppeerraattiinngg
In this operating mode, the front and rear wheels steer at the same time and opposite
direction.
For this purpose :
- Set the switch to
‘AUTO’.
- Press the 4-wheel pedal.
- Turn the steering control so as to place the front and rear wheels in straight position
22-
99
-
33
FFOOUURR WWHHEEEELL SSTTEEEERRIINNGG