HARDI-EVRARD ALPHA PLUS 4100 - Spray System Preparation: Nozzles and Filters; Nozzle Fitting Guidelines; Filter Assembly Checks

ALPHA PLUS HARDI NOVA
PP RR EE PP AA RR AA TT II OO NN
CHAPTER
33-
4
TTrriipplleett
Seals
ISO ‘’Color Tips’’ with integrated nuts
Check the assembly of the filtration elements :
- A inlet filler is present.
- A suction filter.
- A delivery filter.
- In-line filter.
Sprayers components such as valves, diaphragms and operating unit may be blocked or damaged during
operation
Nozzles blockages do not occur whilst spraying
33-
77
-
22
FFIILLTTEERRSS
SSuuccttiioonn ffiillttee rr
- Undo the nut
((11))
and remove the bowl
`- Clean element
((22))
in clean water
- Check the presence of the seal
((33))
- Reassemble the filter unit.
**
White color element filter (
3322
mesh) delivered as standard
Choosing the
ttyyppee ooff nnoozzzzllee
,
vvoolluummee//hhaa
,
ssppeeeedd
and
pprreessssuurree
, refer to the ‘Technical Application’’ .
- Fit the nozzles to the Four-way nozzles, ensuring that the nozzles seals are in place.
33-
77
-
11
FFIITTTTIINNGG TTHHEE NNOOZZZZLLEESS
33 -77 SS PP RR AA YY
1
2
3
1
2
1
2