HARDI-EVRARD ALPHA PLUS 4100 - Spray Filters and Pump Checks; Delivery and In-line Filter Maintenance

ALPHA PLUS HARDI NOVA
PP RR EE PP AA RR AA TT II OO NN
CHAPTER
33-
5
The delivery filter is located at the left-hand side of the machine.
Prior to any spraying, it is essential to put filter element into the
filter.
- Undo the nut
((11))
to remove the bowl
- Check the filter element
((22))
, seal
((33))
and the tube
((44))
The cleaning filter is automatic, for this purpose :
- Undo gently the draining valve
((55))
, the impurities are emptied
out
VERS RAMPE
DDeelliivveerryy ffiillttee rr
IInn-lliinnee ffii lltteerrss
33-
77
-
33
PPUUMMPP
- Check the drain plug located on the diaphragm HARDI pump
((33))
- Check that the red handle of the drain valve located on the left side of the mobile unit is released
- Check that the cord of floating gauge is free.
** WWhhiittee
filter element
660000 mmiiccrroonnss ((3322mmeesshh)),,
delivered as standard
Blue filter
element
330000 mmiiccrroonnss ((5500mmeesshh))
TO BOOM
The in-line filters are mounted directly to the boom
- Close the boom supply by means of the Regulor.
- Remove the bowl of the filter
((11))
- Clean the filter element
((22))
- Choose appropriate element filter and the density of chemical products to prevent the blockage of the
nozzles.
**
bblluuee ffiilltteerr 330000 mmiiccrroonnss ((5500 mmeesshh)),, ddeelliivveerryy aass ssttaannddaarrdd
RReedd ffiilltteerr eelleemmeenntt 117755 mmiiccrroonnss ((8800 mmeesshh))
YYeellllooww ffiilltteerr eelleemmeenntt 114400 mmiiccrroonnss ((110000 mmeesshh))
1
2*
3
4
5
1
1
1
2