3. Part No.3 is extention leg. YOU DONT NEED IT WHEN YOUR CONTAINER IS GENERAL PURPOSE
CONTAINER. YOU NEED IT WHEN YOUR CONTAINER IS HIGH QUBE
4. Connect all parts together by using clips(Part No. 20 & Part No.23 and bolts.
C--INSTRUCTION FOR COVER ATTACHED
Assembly the end cover first.
NOTE: DO NOT install the cover onto the frame of your building in high wind conditions. A
slight breeze is the most advantageous for cover installation. To take advantage of the breeze,
pull the cover up over the arches with the breeze blowing in the cover like a sail filled with air.
Figure 2
.
To Next Page
Loading...
Need help?
General
