To Next PageTo Next PageWhy does my Hario V60 Coffee King 2 overflow?
To prevent coffee from overflowing in your Hario Coffee Maker, ensure you remove the server lid during brewing. Also, do not exceed the 750mL maximum water capacity in the tank, and avoid adding 50g or more of ground coffee. Using a medium-fine grind can also prevent overflow.
What to do if my Hario V60 Coffee King 2 cannot brew coffee?
Your Hario Coffee Maker might not be brewing coffee because the power plug isn't properly inserted, the power is off, the water tank is empty, or there's no ground coffee in the dripper. Ensure the power is on, the tank is filled with water, and ground coffee is placed in the dripper with a paper filter. If brewing was started immediately after the previous operation, wait at least five minutes before starting brewing again.
Why is my Hario Coffee Maker showing an error and all lamps are on?
If all the lamps turn on and an alert sounds (an error is displayed) on your Hario Coffee Maker, it could be due to water at 65° or above being used. Press the start button, turn off the power with the switch, then turn the power back on to cancel the error display. Allow the main body to cool for at least five minutes, then use water below 65°. Ensure the power plug is properly inserted. It may also be because brewing was started while the main body was still hot.
What to do if hot water is not discharged correctly from Hario V60 Coffee King 2 Coffee Maker?
If the hot water isn't discharging correctly from your Hario Coffee Maker, it may be due to scaling on parts like hot water pipes and switching valves. Perform cleaning with citric acid to remove scaling.
Why is coffee extraction slow on my Hario Coffee Maker?
If the coffee extraction is slow in your Hario Coffee Maker, the coffee beans might be too finely ground. Try using a medium-fine grind instead.
Why is the coffee from my Hario Coffee Maker lukewarm?
If your brewed coffee is lukewarm when using your Hario Coffee Maker, it might be because the coffee beans or ground coffee were stored in a refrigerator or freezer. Make sure that the coffee beans or ground coffee are at room temperature before use.
How to get rid of paper filter odor in Hario Coffee Maker?
Before setting the dripper on the main body, pour boiling water over the dripper with the paper filter inside and let the hot water pass through the paper filter before use.
General| Brand | Hario |
|---|---|
| Model | V60 Coffee King 2 |
| Category | Coffee Maker |
| Language | English |
Steps for cleaning the coffee maker using citric acid or vinegar.
Explanation of symbols like Danger, Warning, Caution, and prohibited acts.
Covers electrical safety, handling, usage environment, and child safety.
Details on hot surfaces, steam, water levels, and product placement.
Explains how the cone shape enhances coffee extraction.
Describes the benefit of the large hole for unrestricted extraction.
Details how spiral ribs facilitate coffee bloom and air escape.
Covers compact body and power cord storage.
Details the 21-hole outlet and high-temp system.
Explains simple operation and heat retention.
Identifies key components of the coffee maker's main body.
Lists the items that come with the coffee maker.
Steps for washing removable parts and running an initial water cycle.
Covers filling water, positioning server/dripper, and using buttons.
Steps for filling water, adding filter and coffee grounds.
Details on selecting servings, starting brew, and completion alerts.
Instructions for removing the server, pouring coffee, and heat retention.
Guidance on powering down and cooling before next use.
Recommended amounts of coffee grounds for different water volumes.
Instructions for preparing iced coffee, including warnings.
How to handle error displays (all lights on, alert sounds).
Solutions for coffee not brewing, slow extraction, or overflows.
Addresses lukewarm coffee and paper filter odor concerns.
Covers safe server use, microwave precautions, and general care.
Guidelines for washing and cleaning coffee maker components.
Includes washable parts, customer service, and technical details.
