TM
9-879
46
MOTORCYCLE,
SOLO
[HARLEY-DAVIDSON
MODEL WLA)
support rod nut-
Attach right
end of
front safet>'
guard to sidebar
with footboard
front support stud. Replace iock washer,
and
tighten
nut.
Also
tighten
footboard rear support stud nut. Connect stop light
switch control to brake foot pedal,
(22)
Attach
brake front rod to bell crank:
fit plain washer
and
secure with cotter pin.
(23)
Connect battery ground wire to frame
lug on right side of
vehicle.
b.
Check
instrument panel signal lights for
normal indications,
and
see that oil is in tank before starting
engine.
84
To Next Page