HARMAN/BECKER BE 7928 - Inserting a SD;MMC Card

9
 Tap
Touch the screen once with your fingertip to open items or select onscreen
buttons or options.
 Drag
Hold your fingertip on the screen and drag up/down/left/right or across the
screen.
 Tap and hold
Tap and hold your fingertip until an action is complete, or a result or menu is
shown.
1.6 Inserting a SD/MMC Card
Your device has a SD/MMC slot where you can insert an optional Secure Digital
or MultiMediaCard storage card. It supports up to 2GB storage card.
To use a SD/MMC card, insert it into the slot, with the connector pointing to the
slot and its label facing the front of the device.
To remove a card, first make sure that no application is accessing the card, then
slightly push the top edge of the card to release it and pull it out of the slot.
NOTE:
 Make sure that no foreign objects enter the slot.
 Keep a SD or MMC card in a well-protected box to avoid dust and humidity when you are
not using it.