Home Solutions
The AVR 255 is the most affordable Harman Kardon
®
receiver to feature both Dolby TrueHD
and DTS-HD Master Audio decoding on the audio side, and Faroudja DCDi Cinema video
processing to 1080p on the video side. But there’s plenty more to recommend the AVR 255,
including three HDMI inputs, connections for external amplifi ers, EzSet/EQ technology
to fi ne-tune your system to the acoustics of your room, and an RS-232 port for future
fi rmware upgrades. Perhaps the highest recommendation of all? As do all Harman Kardon
A/V receivers, the AVR 255 features a high-current, ultrawide-bandwidth design for
maximum fi delity.
Key Specifi cations
• Audio Section – Continuous Average Power (FTC), (stereo mode): 65 watts per channel
into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; (seven-channel
surround mode): 50 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD,
all channels driven; High Instantaneous Current Capability (HCC): ±35 amps
• Tuner – Usable Sensitivity: IHF 1.3μV/13.2dBf; THD at 1kHz with 100% modulation,
(mono): 0.2%; (stereo): 0.3%; FM Adjacent Channel Selectivity: ±400kHz, 70dB;
Ultimate (maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB;
(stereo): 68dB
• Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 13.6kg
Depth measurement includes table stand, knobs, buttons and terminal connections, unless stated otherwise;
height measurement includes feet and chassis, unless stated otherwise.
Highlights
• Dolby
®
TrueHD processing
• Logic 7
®
(5.1 and 7.1) processing
• DTS
®
-HD Master Audio
TM
processing
• HDMI repeater with 1080p upscaling
• Faroudja DCDi Cinema
TM
video processing
• EzSet/EQ
TM
equalization
• HDTV-ready
• Component video inputs
• Quadruple-crossover bass manager
• Multiroom audio
• High-current capability
• 192kHz/24-Bit DACs
/ AVR 255
7 x 50W 7.1-Channel A/V receiver with HDMI
TM
1.3a repeater, audio/video processing and upscaling to 1080p
To Next Page
Need help?
General
Weight and Dimensions
