Need help?Do you have a question about the Harman Kardon AVR 247 and is the answer not in the manual?
General| Number of Channels | 7.1 |
|---|---|
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Dolby Digital | Yes |
| DTS | Yes |
| Type | AV Receiver |
| Signal-to-Noise Ratio | 100 dB |
| Input Sensitivity | 200mV |
| Input Impedance | 47k ohms |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 2 |
| Digital Audio Inputs (Coaxial) | 2 |
| Analog Audio Inputs | 5 |
| Total Harmonic Distortion | 0.07% |
| Composite Video Inputs | 4 |
| Composite Video Outputs | 1 |
| Ethernet Port | No |
| USB Port | No |
| Wi-Fi | No |
| Bluetooth | No |
| Power Output | 50W |
| Output Power | 50 watts per channel (8 ohms, 20Hz-20kHz, 0.07% THD) |
| Frequency Response | 10Hz – 100kHz (+0dB, –3dB) |
| Surround Sound Formats | Dolby Digital, DTS |
Details rear panel inputs/outputs for antennas, speakers, audio, video, and remote control.
How to operate the remote and use input selectors for different devices.
Explains the purpose of individual buttons on the remote control.
Explains speaker, subwoofer, source, audio, video, antenna, and serial port connections.
Details analog/digital audio and video connection methods like HDMI, coax, optical, composite.
Optimal positioning for front, surround speakers and subwoofer placement.
Step-by-step guide to connect speakers, subwoofer, antennas, sources, and display.
Instructions for remote programming, IR connectivity, and optional multiroom systems.
Navigating and using the AVR's on-screen display menus for configuration.
Automates speaker calibration for optimal system performance.
Assigns audio/video inputs to specific source devices.
Procedures for powering the receiver on/off, adjusting volume, and muting audio.
Choosing audio/video sources and selecting appropriate surround sound modes.
Explains audio signal processing, Dolby/DTS modes, and specific settings.
Specific adjustments for Dolby modes, Night Mode, and Default Modes.
Manual setup for speaker size, crossover, delay, and channel levels.
Optimizing video picture settings and configuring system preferences.
Programming remote for punch-through, macros, and other advanced features.
Common symptoms, causes, and solutions for operational issues.
Tables listing remote control codes for various devices and system settings.
To Next Page
