EasyManuals Logo

Harman Kardon AVR 247 User Manual

Harman Kardon AVR 247
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Thank you for choosing Harman Kardon
®
!
In the years since Harman Kardon invented the high-fidelity receiver,
we have taken to heart the philosophy of bringing the joy of home
entertainment to as many people as possible, adding performance and
ease-of-use features that enhance the home entertainment experience.
In the years since our first single-channel component was introduced,
Harman Kardon has offered a number of receiver models, each an
improvement upon its predecessors, leading to the AVR 247, a
7.1-channel digital audio/video receiver that offers a wealth of listening
and viewing options, all in an elegant package.
To obtain the maximum enjoyment from your new receiver, we urge you
to read this manual and refer back to it as you become more familiar
with its features and their operation.
If you have any questions about this product, its installation or its
operation, please contact your retailer or customer installer, or visit our
Web site at www.harmankardon.com.
Please register your AVR 247 on our Web site at www.harmankardon.com.
Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products
and/or special promotions.
AVR 247 7.1-Channel Audio/Video Receiver
Audio Section
• 50 Watts x 7, seven channels driven at full power at 8 ohms,
20Hz – 20kHz, <0.07% THD (surround modes), 350 watts total
• 65 Watts x 2, two channels driven at full power at 8 ohms,
20Hz – 20kHz, <0.07% THD (surround off mode), 130 watts total
• High-current capability, ultrawide-bandwidth amplifier design with low
negative feedback
All-discrete amplifier circuitry
• Dual independent power supplies, for front and surround channels
• Quadruple-crossover bass management
• 24-Bit, twin-core Cirrus Logic
®
CS 49510 DSP processor with
32-bit postprocessor
• 192kHz/24-bit D/A conversion
• Sampling upconversion to 96kHz
Surround Modes
• Dolby
®
Digital EX
• Dolby Pro Logic
®
II and IIx (Movie, Music and Game)
• Dolby Virtual Speaker Version 2 (Reference two- or three-speaker;
Wide two-, three-, four- or five-speaker)
• Dolby Headphone Version 2
• DTS
®
(5.1; DTS Stereo; DTS-ES
®
6.1 Discrete and Matrix)
• DTS 96/24
(DTS Stereo)
• DTS Neo:6
®
(Cinema 3-, 5- or 6-channel; Music 5- or 6-channel)
• Logic 7
®
(Cinema, Music and Enhance – 5.1 and 7.1)
• Hall 1 and Hall 2 (5- or 6-channel)
Theater (5- or 6-channel)
• 5- or 7-Channel Stereo
• Surround Off (DSP or Analog Bypass)
WWW.HARMANKARDON.COM
INTRODUCTION
AVR247om.qxd 7/10/07 1:05 PM Page 6

Table of Contents

Other manuals for Harman Kardon AVR 247

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harman Kardon AVR 247 and is the answer not in the manual?

Harman Kardon AVR 247 Specifications

General IconGeneral
Number of Channels7.1
HDMI Inputs2
HDMI Outputs1
Dolby DigitalYes
DTSYes
TypeAV Receiver
Signal-to-Noise Ratio100 dB
Input Sensitivity200mV
Input Impedance47k ohms
Component Video Inputs3
Component Video Outputs1
Digital Audio Inputs (Optical)2
Digital Audio Inputs (Coaxial)2
Analog Audio Inputs5
Total Harmonic Distortion0.07%
Composite Video Inputs4
Composite Video Outputs1
Ethernet PortNo
USB PortNo
Wi-FiNo
BluetoothNo
Power Output50W
Output Power50 watts per channel (8 ohms, 20Hz-20kHz, 0.07% THD)
Frequency Response10Hz – 100kHz (+0dB, –3dB)
Surround Sound FormatsDolby Digital, DTS

Related product manuals