Need help?Do you have a question about the Harman Kardon AVR 265 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Frequency range | 20 - 20000 Hz |
| RMS rated power | - W |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.09 % |
| Power output per channel (20-20KHz@8 Ohm) | 95 W |
| AirPlay | No |
| Product color | Black |
| Audio decoders | Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD |
| Apple docking compatibility | Not supported |
| HDMI in | 5 |
| Ethernet LAN (RJ-45) ports | 1 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 2 |
| Multichannel audio output type | Terminals |
| Connectivity technology | Wired |
| AM band range | 520 - 1620 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 840 W |
| Analog signal format system | PAL |
Weight and Dimensions| Depth | 385 mm |
|---|---|
| Width | 440 mm |
| Height | 165 mm |
| Weight | 11100 g |
Details on placing the receiver on a firm surface and ensuring proper ventilation for optimal performance.
Guidance on speaker placement for 7.1 and 5.1 channel systems for optimal listening experience.
Instructions on how to correctly connect speaker wires to the AVR's speaker terminals.
Steps to connect the subwoofer to the receiver using an RCA audio cable for enhanced bass.
Guidance on connecting the receiver to a TV using HDMI or composite video cables.
Details on connecting various audio and video source components to the receiver's inputs.
Connecting source devices with HDMI connectors for best video and audio quality.
Using composite video connectors for devices without HDMI, requiring separate audio connection.
Connecting component video sources for superior video performance, with an audio connection required.
Connecting devices with optical digital outputs to the receiver's digital audio connectors.
Connecting devices with coaxial digital outputs to the receiver's digital audio connectors.
Using analog audio connectors for source devices without HDMI or digital audio options.
Connecting digital audio recorders to the receiver's optical digital output for recording.
Connecting video recorders to the receiver's composite video output for recording.
Instructions for connecting the optional Bridge IIIP accessory to the receiver.
Guidance on connecting FM and AM antennas for optimal radio reception.
Connecting the receiver to a home network for Internet radio and DLNA content.
Instructions for connecting the receiver to a power outlet using the supplied power cord.
Steps for installing AAA batteries into the remote control unit.
Procedure for powering on the audio/video receiver using the main power switch and button.
Guide to setting up speakers using the EzSet/EQ microphone for automatic optimization.
Instructions on how to reassign source buttons to different input connectors.
Details on power consumption, dimensions, and weight for different receiver models.
To Next Page