Harman Kardon AVR 265 User Manual

5
AVR
HDMI Devices
If any of your source devices have HDMI connectors, using them will provide the best possible video and
audio performance quality. Since the HDMI cable carries both digital video and digital audio signals,
you do not have to make any additional audio connections for source devices you connect via HDMI
connectors.
Note: If you have a TV or other source device equipped with the HDMI Audio Return Channel Function,
you can feed its sound to the AVR via the HDMI Monitor Out connection’s Audio Return Channel, and it
will not require additional audio connections to the AVR. Refer to the complete AVR 3650, AVR 365, AVR
2650, AVR 265 Owner’s Manual, downloadable at www.harmankardon.com.
Receiver
HDMI Connectors
HDMI Cable
(not supplied)
To HDMI
Output
HDMI-Equipped
Source Device
Component Video Devices
If any of your video source devices have component video connectors (and do not have HDMI
connectors), using the component video connectors will provide superior video performance. You
will also need to make an audio connection from the source device to the receiver.
Receiver Video
Connectors
Component Video Cable
(not supplied)
To Component
Video Outputs
Component Video-Equipped
Source Device
Composite Video Devices
Use composite video connectors for video source devices that don’t have HDMI or component video
connectors. You will also need to make an audio connection from the source device to the receiver.
Receiver
Video Connectors
Composite Video Cable
(not supplied)
To Composite
Video Output
Composite Video-Equipped
Source Device
Optical digital audio devices
If your non-HDMI source devices have optical digital outputs, connect them to the receiver’s optical
digital audio connectors. NOTE: Make only one type of digital connection (HDMI, optical or coaxial)
from each device.
Receiver Digital Audio
Connectors
Optical-Equipped
Source Device
Optical Digital Audio
Cable (not supplied)
To Optical Digital Audio
Output
Coaxial digital audio devices
If your non-HDMI source devices have coaxial digital outputs, connect them to the receiver’s coaxial
digital audio connectors. NOTE: Make only one type of digital connection (HDMI, optical or coaxial)
from each device.
Coaxial-Equipped
Source Device
Receiver Digital Audio
Connectors
To Coaxial Digital
Audio Output
Coaxial Digital Audio
Cable (not supplied)
Connections
ENGLISH

Harman Kardon AVR 265 Specifications

General

Receiver type	-
Frequency range	20 - 20000 Hz
RMS rated power	- W
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.09 %
Power output per channel (20-20KHz@8 Ohm)	95 W
AirPlay	No
Product color	Black
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Apple docking compatibility	Not supported
HDMI in	5
Ethernet LAN (RJ-45) ports	1
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Multichannel audio output type	Terminals
Connectivity technology	Wired
AM band range	520 - 1620 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	30
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	840 W
Analog signal format system	PAL

Weight and Dimensions

Depth	385 mm
Width	440 mm
Height	165 mm
Weight	11100 g