Harman Kardon AVR 265 User Manual

6
AVR
Analog Audio Devices
Use the receiver’s analog audio connectors for source devices that don’t have HDMI or digital audio
connectors.
Receiver
Analog Audio Connectors
Analog
Source Device
To Stereo Analog Audio
Output
Stereo Audio
Cable (not supplied)
Audio Recorders
Connect a digital audio recorder’s optical digital input to the receiver’s optical digital output. You can
record both coaxial and optical digital input signals
Receiver
Digital Audio Recorder Connector
Digital
Recording Device
To Optical Digital
Record Input
Optical Digital Audio
Cable (not supplied)
.
Connect an analog audio recorder’s inputs to the receiver’s analog audio Rec Out connectors. You can
record any analog audio input signal.
Video Recorders
Connect an analog video recorder’s video input connector to the receiver’s composite video Rec Out
connector. You can record any composite video signal. NOTE: To record the audio and video from the
source device, connect the receiver’s analog audio Rec Out connectors to the analog video recorder’s
audio inputs.
Receiver
Analog Audio Recorder Connectors
Stereo Audio
Cable (not supplied)
To Stereo Analog Record
Inputs
Analog
Recording Device
Receiver Analog Audio
Recorder Connectors
Receiver Analog Video
Recorder Connectors
Analog Audio/
Video Cable
(not supplied)
To Analog
Audio/Video
Record Inputs
Analog Video Recording
Device
Connections

Harman Kardon AVR 265 Specifications

General

Receiver type	-
Frequency range	20 - 20000 Hz
RMS rated power	- W
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.09 %
Power output per channel (20-20KHz@8 Ohm)	95 W
AirPlay	No
Product color	Black
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Apple docking compatibility	Not supported
HDMI in	5
Ethernet LAN (RJ-45) ports	1
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Multichannel audio output type	Terminals
Connectivity technology	Wired
AM band range	520 - 1620 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	30
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	840 W
Analog signal format system	PAL

Weight and Dimensions

Depth	385 mm
Width	440 mm
Height	165 mm
Weight	11100 g