Need help?Do you have a question about the Harman Kardon AVR 270 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Power output per channel (20-20KHz@8 Ohm) | 100 W |
| Speakers connectivity type | - |
| Wi-Fi | No |
| Ethernet LAN | Yes |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | FM |
| Analog signal format system | NTSC, PAL |
| Product color | Black |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 120 W |
| HDMI in | 8 |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 440 mm |
| Height | 165 mm |
| Weight | 7700 g |
Guidance on placing the AVR for ventilation and 7.1/5.1 speaker layout.
Warning to unplug the AVR before making any connections to prevent damage.
Instructions for connecting speakers to terminals and a subwoofer.
Steps for connecting TVs via HDMI or composite video.
Guidance on mapping source buttons to specific input connectors.
Details on connecting various digital and analog audio/video sources.
Instructions for connecting analog devices, USB/iOS, and home network.
Connecting radio antennas and the AVR to AC power.
Steps for remote setup, powering on, and initial speaker calibration.
Navigating OSD menus for speaker setup and source device input configuration.
Configuring system settings and activating the HDMI Audio Return Channel.
To Next Page