Need help?Do you have a question about the Harman Kardon AVR 2000 and is the answer not in the manual?
General| Type | AV receiver |
|---|---|
| Channels | 5.1 |
| Total Harmonic Distortion | 0.07% |
| Video Inputs | Composite, S-Video |
| Digital Inputs | Coaxial, Optical |
| Input Sensitivity | 200mV |
| Input Impedance | 47k ohms |
| Speaker Impedance | 8 ohms |
| Audio Formats Supported | Dolby Digital, DTS |
| Surround mode power | 50W (front), 50W (center), 50W (rear) |
| Power Output | 50W per channel (8 ohms, 20Hz-20kHz, 0.07% THD) |
Covers essential safety guidelines for operating the receiver, including electrical hazards and proper handling.
Instructions for programming the remote for other devices, macros, and punch-through functions.
Guidance on connecting various audio, video sources, and SCART A/V interfaces.
Instructions for selecting, placing, and configuring speakers for optimal surround sound.
Steps for initial power-up, selecting inputs, and configuring settings for each source.
Guide to turning the unit on/off, using the sleep timer, and selecting audio/video sources.
Details on playing digital audio sources like Dolby Digital, DTS, and PCM, including MP3 playback.
Instructions for programming the remote to control other devices using codes or auto-search.
Guide to diagnosing and resolving common operational problems with the AVR 2000 receiver.
To Next Page