Harman Kardon AVR 260 Service Manual

harman/kardon Service Manual
AVR 260/230
7 x 50W 7.1 CHANNEL A/V RECEIVER
CONTENTS
EXPLODED VIEW AND PARTS 14
ELECTRICAL PARTS LIST 15
SEMICONDUCTOR PINOUTS 49
PCB DRAWINGS 109
BLOCK DIAGRAM 116
WIRING DIAGRAM 117
AMP BIAS ADJUSTMENT 118
SCHEMATIC DIAGRAMS 119-131
ESD WARNING 2
FRONT AND REAR PANELS 3
REMOTE CONTROL 8
TROUBLESHOOTING GUIDE 10
PROCESSOR RESET 10
BASIC SPECIFICATIONS 11
PACKAGE LISTS AND PARTS 12
DISASSEMBLY 13
Released EU2010 Harman Consumer Group, Inc. Rev 0, 07/2010
8500 Balboa Boulevard
Northridge, California 91329
harman/kardon
AVR 260/230 Service Manual
Page 1 of 131

Harman Kardon AVR 260 Specifications

General

Impedance	8 Ω
Receiver type	Surround
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.07 %
Power output per channel (1KHz@6 Ohm)	120 W
Power output per channel (20-20KHz@8 Ohm)	50 W
HDMI in	3
Audio (L/R) in	6
Component video (YPbPr/YCbCr) in	4
Number of HDMI outputs	1
Connectivity technology	Wired
Speakers connectivity type	RCA
Wi-Fi	-
Ethernet LAN	No
Supported radio bands	AM, FM
Preset stations quantity	30
Product color	Black, Grey
Audio decoders	Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-HD
Apple docking compatibility	Not supported
AC input voltage	220-240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	382 mm
Width	440 mm
Height	165 mm
Weight	11800 g