Harman Kardon AVR 2700 Manual

AVR 2700
7.1-channel network-connected audio/video receiver with 100 watts per channel output. Featuring Apple AirPlay,
High-Denition Dolby
®
and DTS
®
surround-sound modes, multizone functionality and 4K video support.
Experience entertainment like you never thought possible at
home. The Harman Kardon
®
AVR 2700 delivers high-denition
video along with crisp, detailed 7.1-channel surround sound.
This 100-watt, network-connected audio/video receiver features
eight HDMI
®
inputs with 3D and Audio Return Channel including
one on the front panel. Built-in DLNA Certied
®
1.5 Ethernet
connectivity and AirPlay not only keep you connected to all your
sources, but enable you to output them in the most realistic quality
possible. Get the most out of your home theater. Experience the
Harman Kardon AVR 2700.
A new level in home entertainment.
Movie-theater-quality viewing
• HDMI with 3D, Audio Return Channel, CEC and Deep Color
• Powerful 7.1-channel surround system
• Dolby
®
TrueHD and DTS-HD Master Audio
™
decoding
• Dolby Volume (for constant audio level regardless of
changes in program content)
Supreme connectivity
• DLNA Certied 1.5 connectivity
• AirPlay-enabled
• 4K video pass-through and upscaling
• Control applications for Apple and Android
™
products

Harman Kardon AVR 2700 Specifications

Audio Section

stereo mode continuous average power	100 watts/ch, 20Hz – 20kHz, <0.07% THD, both channels driven @ 8 ohms, 6-ohm certified
multichannel power	100 watts/ch, 20Hz – 20kHz, <0.07% THD, two channels driven @ 8 ohms, 6-ohm certified
bandwidth @ 1W (+0dB/–3dB)	10Hz – 130kHz
input sensitivity/impedance (line-in)	200mV/47k ohms
signal-to-noise ratio (IHF-A)	100dB
high instantaneous current capability (HCC)	±35 amps
slew rate	40V/μsec

FM Tuner Section

frequency range	87.5MHz–108.0MHz
usable sensitivity (IHF)	1.3μV/13.2dBf
signal-to-noise ratio (mono/stereo)	70dB/68dB
distortion (mono/stereo)	0.2%/0.3%
stereo separation	40dB @ 1kHz
selectivity (±400kHz)	70dB
image rejection	80dB
IF rejection	90dB

AM Tuner Section

frequency range	520kHz – 1, 720kHz
signal-to-noise ratio	45dB
usable sensitivity (loop)	500μV
distortion (1kHz)	50%, mod 0.8%
selectivity (±10kHz)	30dB

Video Section

television format	NTSC
input level/impedance	1Vp-p/75 ohms
output level/impedance	1Vp-p/75 ohms
video frequency response (composite video)	10Hz – 8MHz (–3dB)

General

power requirement	AC 120V/60Hz
power consumption	120W idle; 1405W maximum
dimensions (W x H x D)	17-5/16" x 6-1/2" x 15" (440mm x 165mm x 382mm)
weight	7.7kg (16.9 lb)